|
|
|
Who's Online
There currently are 5844 guests online. |
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
I want to give you a real heads-up for your desire to enable such people as I to acquire the information I need to maintain the older types of equipment such as this Akai HXA351W. You do a swell job with all the processes you have to perform so I can have a legible, thus usable
document which does not send me crazy trying to figure out the blurry text of a bad copy.
Very well done, Thomas.
;
This manual is very well presented and after printing out looks about as close to an original as I think you can get. The quality is second to none.
The content of the manual is comprehensive and I think it would be well suited to an audio repair professional which I'm not but I did find it very informative and helpful.
The cost of the manual is more than covered by the money I'll save when I change the keep memory battery now I have the relavant info.
Very pleased with my purchase and can recommend it wholeheartedly as I can other manuals I've downloaded from this site.
Regards
Limey Alex
 ;
Complete manual including mechanical part in good pdf quality. Shaded greys of the pcb due to pdf not perfect but usable.
;
Nice pdf file of the manual sent promptly. Thanks.
;
Complete MFG Service Manual at a good price FAST !
F. NOISE FILTER ASS'Y HIGH VOLTAGE DIODE, HIGH VOLTAGE CAPACITOR, AND COOLING FAN MOTOR REMOVAL
1 ) Disconnect lead wires from the noise filter ass'y and remove screw securing the noise filter earth wire to the back plate. 2) Push two hook of the guide suction and lift up the rear of noise filter ass'y. 3) Disconnect lead wires from H.V. capacitor and remove screw securing the H.V. diode earth wire to the back plate. 4) Disconnect each lead wires from the AC relay and the fan motor. 5) Remove two screws securing the guide suction ass'y to the back plate and lift up the guide suction ass'y. 6) Remove one screw from H.V. capacitor bracket. 7) Pull H.V. capacitor bracket from the guide suction. 8) Remove the fan from the fan motor. 9) Remove two screws securing the fan motor to the guide suction and lift it up.
H.V. Transformer
I. C-MOTOR, THERMISTOR AND SHEATH HEATER REMOVAL
1) Remove the two screws securing the cover assembly to the oven cavity. 2) Disconnect the leadwire from the circulation motor terminal and the sheath heater. 3) Remove the screws of the thermistor, guide assychamber and lift up the guide assy-chamber. 4) Remove a hex nut securing the circulation fan to shaft of the C-motor. 5) Remove screws securing the motor bracket to the guide assy-chamber. 6) Remove two hex nuts securing the C-motor to the motor bracket.
G. OVEN LAMP REMOVAL
1) Disconnect the wire leads from oven lamp. 2) Remove one screw securing the Air Duct to the magnetron. 3) Push hook to Right and Left of Air Duct, with Drive. 4) Lift the oven Lamp up.
H. HIGH VOLTAGE TRANSFORMER REMOVAL
1) Disconnect the wire leads from the transformer to the magnetron, C. Protector ASS'Y assembly. 2) Remove four screws securing the H.V. transformer to the base plate. 3) Lift the H.V. transformer up.
5-6
|
|
|
> |
|
